Toyota Corolla KE30 Dash Housing for RDM-7

Made by 3D Racing Solutions (3DRS) to fit this car's instrument cluster position, so the RDM-7 sits where the factory gauges were. The housing is made in two pieces that fit together in the dash.

The RDM-7 bolts into the housing on its four M5 brass inserts, the same ones the RDM-7 Dash Mount uses, and the dash lead runs out through the opening in the back.

3DRS prints each housing to order on the Gold Coast in UV stabilised ASA, chosen for its strength and resistance to cabin heat, then finishes it in a chip-resistant 2K paint.

Made to order. Allow about two weeks for 3DRS to make it, plus shipping.

How it fits depends on the car. Some housings sit in the factory cluster opening, others replace the original surround, and a few cars need the dash pad or shroud trimmed to suit a larger screen. If you're not sure, send us your car and dash setup and we'll check fitment with 3DRS before you order.

Housing only. The RDM-7, wiring and sensors are sold separately.

Renders shown, from the 3DRS design.