Pictures of the 3DRS Mitsubishi Lancer Evolution VII, VIII and IX dash housing are coming
3DRSHousing

Mitsubishi Lancer Evolution VII, VIII and IX Dash Housing for RDM-7

For 2001 to 2007 cars, printed to order by 3DRS

$329.95 AUD
Printed to orderFree shipping in Australia
Add the RDM-7 and save 10% on this housing

Need the cable for your ECU as well? Set it up on the RDM-7 page, the housing picker is in step 2.

Your orderMitsubishi Lancer Evolution VII, VIII and IX Dash Housing $329.95
Made by3D Racing Solutions (3DRS), Gold Coast

Made by 3D Racing Solutions (3DRS) to fit this car's instrument cluster position, so the RDM-7 sits where the factory gauges were.

3DRS prints each housing to order on the Gold Coast in UV stabilised ASA, chosen for its strength and resistance to cabin heat, then finishes it in a chip-resistant 2K paint.

Made to order. Allow about two weeks for 3DRS to make it, plus shipping. 3DRS models it to suit the RDM-7 when you order, and pictures of this housing are coming.

How it fits depends on the car. Some housings sit in the factory cluster opening, others replace the original surround, and a few cars need the dash pad or shroud trimmed to suit a larger screen. If you're not sure, send us your car and dash setup and we'll check fitment with 3DRS before you order.

Housing only. The RDM-7, wiring and sensors are sold separately.

Complete the install

Goes with it.

RDM-7 ECU Adaptor, OBD2: DTM-4 Style plug to a 16-pin OBD2 plug, with the fuse tap that comes in the box (render) RDM RDM-7 ECU Adaptor $49 RDM-7 dash mount in raw aluminium, front three-quarter view showing the U-shaped plate and the fixing foot In stock RDM RDM-7 Dash Mount $69 Black RDM-7 sun visor, front three-quarter view showing the hood and the two side tabs Printed to order RDM RDM-7 Sun Visor $39 Coming soon RDM RDM-7 Screen Protector $49 RDM-7 Haltech Lead, a DTM-4 Style plug at both ends (render) RDM RDM-7 DTM-4 Extension From $25 Coming soon RDM DTM-4 Style Connector Kit From $8.95 A sealed CAN keypad with backlit rubber buttons in a black housing Coming soon RDM RDM CAN Keypad From $405 Coming soon RDM RDM Button Insert From $11.95 Link CAN cable, part CANJST, with a JST connector at one end and a grey circular connector at the other Link Link CAN Cable, JST $53.46 Link CAN cable, part CANJST4, with a four-pin JST connector at one end Link Link CAN Cable, 4-pin JST $53.46